Follow along with the video below to see how to install our site as a web app on your home screen.
Catatan: This feature may not be available in some browsers.
Saat ini Anda mengakses IndoForum sebagai tamu, sehingga Anda tidak memiliki akses penuh untuk melihat artikel dan diskusi yang hanya tersedia bagi anggota. Dengan bergabung, Anda akan mendapatkan akses penuh untuk bertanya, mengirim pesan pribadi, mengikuti polling, dan menggunakan fitur-fitur lainnya. Proses pendaftaran sangat cepat, mudah, dan gratis. Silakan daftar dan validasi email Anda untuk mendapatkan akses penuh sebagai anggota. Harap masukkan alamat email yang valid dan periksa kotak masuk Anda setelah mendaftar untuk proses validasi.
Both bridges are switches are being used throughout the TestKing LAN. Which of
the following statements are true regarding bridges and switches in this network?
(Choose 3)
A. Switches are primarily software based while bridges are hardware based.
B. Switches usually have a higher number of ports than most bridges.
C. Bridges are frequently faster than switches.
D. Bridges define broadcast domains while switches define collision domains.
E. Both bridges and switches forward Layer 2 broadcasts.
F. Both bridges and switches make forwarding decisions based on Layer 2 addresses.
CDP is running between two TestKing devices. What information is supplied by
CDP? (Select three)
A. Device Identifiers
B. Capabilities list
C. Platform
D. Route identifier
E. Neighbor traffic data
Which OSI layer header contains the address of a destination host that is on another
network?
A. Application
B. Presentation
C. Session
D. Transport
E. Network
F. Data link
G. Physical
As a CCNA candidate, you will be expected to know the OSI model very well.
Which of the following are associated with the application layer (layer 7) of the OSI
model? (Choose two)
A. TCP
B. Telnet
C. FTP
D. Ping
E. IP
F. UDP
Which layer of the OSI reference model is responsible for ensuring reliable
end-to-end delivery of data?
A. Application
B. Presentation
C. Session
D. Transport
E. Network
F. Data-Link
Acknowledgements, sequencing, and flow control are functions that are handled by
which layer of the OSI model?
A. Layer 5
B. Layer 4
C. Layer 7
D. Layer 6
E. Layer 3
F. Layer 2
G. Layer 1
A receiving host has failed to receive all of the segments that it should acknowledge.
What can the host do to improve the reliability of this communication session?
A. Start a new session using UDP
B. Obtain a new IP address from the DHCP server
C. Use a different source port for the session
D. Decrease the sequence number
E. Decrease the window size
You have set up an Internet based FTP server, where people can upload and
download files. In terms of the OSI model, what is the highest layer used during the
FTP sessions.
A. Application
B. Presentation
C. Session
D. Transport
E. Internet
F. Data Link
G. Physical
Which two statements describe the Cisco implementation of VLANs? Select two.
A. VLANs 1002 through 1005 are automatically created and cannot be deleted.
B. VLAN 1 is the default Ethernet VLAN.
C. By default, the switch IP address is in VLAN 1005.
D. CDP advertisments are only sent on VLAN 1002.
What is the purpose of the Cisco VLAN Trunking Protocol?
A. to allow native VLAN information to be carried over a trunk link.
B. To provide a mechanism to dynamically assign VLAN membership to switch ports.
C. To allow traffic to be carried from multiple VLANs over a single link between
switches.
D. To provide a mechanism to dynamically assign VLAN membership to switch ports.
E. To allow for managing to additions, deletions, and changes of VLANs between
switches.
Which of the following systems would not respond correctly to an nmap XMAS
scan?
A. Windows 2000 Server running IIS 5
B. Any Solaris version running SAMBA Server
C. Any version of IRIX
D. RedHat Linux 8.0 running Apache Web Server
According to the CEH methodology, what is the next step to be performed after
footprinting?
A. Enumeration
B. Scanning
C. System Hacking
D. Social Engineering
E. Expanding Influence
Which layer of the OSI reference model is responsible for ensuring reliable
end-to-end delivery of data?
A. Application
B. Presentation
C. Session
D. Transport
E. Network
F. Data-Link
When a switch port is used as a VLAN trunk, which of the following trunk modes
are valid? (Select all that apply.)
A. Blocking
B. Auto
C. Desirable
D. On
E. Transparent
F. Learning
What kind of cable should be used to establish a trunked line between two Catalyst
switches?
A. A straight-through cable
B. An EIA/TIA-232 serial cable
C. An auxiliary cable
D. A modem cable
E. A cross-over cable
The TestKing network administrator needs to determine what LAN devices to
install on the TestKing network. What are two advantages of using Layer 2
Ethernet switches over hubs? (Choose two)
A. Allowing simultaneous frame transmissions
B. Increasing the size of broadcast domains
C. Increasing the maximum length of UTP cabling between devices
D. Filtering frames based on MAC addresses
E. Decreasing the number of collision domains
Which connection uses the default encapsulation for serial interfaces on Cisco
routers?
A. The serial connection to the Multinational Core
B. The serial connection to the TestKing1 branch office
C. The serial connection to the TestKing2 branch office
D. The serial connection to the TestKing3 branch office
A static map to the TestKing12 location is required. Which command should be
used to create this map?
A. frame-relay map ip 172.30.0.3 344 broadcast
B. frame-relay map ip 172.30.0.3 704 broadcast
C. frame-relay map ip 172.30.0.3 702 broadcast
D. frame-relay map ip 172.30.0.3 196 broadcast
Which one of the following characteristics is true regarding the use of hubs and
switches?
A. Hubs can have their ports be configured with VLANs
B. Using hubs is costly with regard to bandwidth availability.
C. Switches can not forward broadcasts.
D. Switches are more efficient than hubs in processing frames.
E. Switches increase the number of collision domains in the network.
