Jual dbE Acoustics Earphone, FiiO Headphone Amplifier & FiiO Speaker

[kantongkresek]

Good Sound is not Expensive

Earphones
dbE Acoustics HF-10 II Rp. 100.000,-
dbE Acoustics PR-10 Rp. 128.000,-
dbE Acoustics PR-18 Rp. 218.000,-
dbE Acoustics PR-20 II Rp. 225.000,-
dbE Acoustics PR-20 Rp. 270.000,-
dbE Acoustics HF-30 with earhook Rp. 320.000,-

Portable Headpones
dbE Acoustics Portable Headphones PH-10 Rp. 250.000,-
dbE Acoustics Portable Headphones PH10 + Mod Rp. 280.000,-
dbE Acoustics Portable Headphones PH-10 + dbE PA20 Head Amp Rp. 320.000,-

Earphones Acessories
dbE Acoustics Bi Flange Rp. 20.000 / 2 pasang
dbE Acoustics Tri Flange Rp. 20.000 / 2 pasang
dbE Acoustics Flange Size S Rp. 20.000 / 3 pasang
dbE Acoustics Flange Size M Rp. 20.000 / 3 pasang
dbE Acoustics Flange Size L Rp. 20.000 / 3 pasang
dbE Acoustics Foam Rp. 20.000 / 2 pasang
dbE Acoustics Earhook for dbE HF30 Rp. 10.000 / pasang
dbE Acoustics Earpad for dbE HF10 & dbE PR10 Rp. 5.000 / pasang

Headphone Amplifier
dbE Accoustics Headphone Amplifier PA-20 / FiiO E3 (Black/White) Rp. 95.000,-

FiiO Headphone Amplifier E5 Rp. 240.000,-
Fiio E1 iPod Headphone Amp with line control function Rp. 200.000,-


Speaker
FiiO S3 Card Reader Speaker + Memory Card Player/MP3 (Black/White) Rp. 280.000,-
FiiO N3 Notebook Speakers (Black/White) Rp. 128.000,-
FiiO Portable Speaker S9 (White) Rp. 240.000,-

Barang Garansi Distributor Indo 1 Tahun (1 to 1 replacement]

Cables
Fiio LOD for Ipod (Line Out cable L1) Rp. 75.000,-

Headphone Amplifier

iBasso T3 Ultra Portable Headphone Amplifier @ Rp. 1.100.000,- New!!
iBasso T3D Ultra Portable Headphone Amplifier @ Rp. 1.300.000,- New!!
iBasso D2+ Boa Portable Headphone Amplifier USB-DAC @ Rp. 1.650.000,- New!!
iBasso P3+ Heron Portable Headphone Amplifier @ Rp. 1.800.000,-
iBasso D4 Mamba Portable Amp/ USB-DAC @ Rp. 2.100.000,- New!!
iBasso D10 Cobra High performance Stereo DAC and Headphone Amp @ Rp. 2.750.000,-

Barang Garansi Distributor Indo 1 Tahun

Harga belum termasuk ongkos kirim. mohon cek di www.jne.co.id

Pembayaran Melalui Rek Bank BCA, Bank BII, Bank Mandiri.

Hub:

www.kantong-kresek.com
Mangga Dua Mall Lantai 5 Blok C117
Jalan Mangga Dua Raya, Jakarta Pusat
Voice 021 99169971, 0815 107 70718 or 08999725820 (SMS only) for faster response!
Senin s/d Jumat jam 11 sd 6 sore. Sabtu jam 11 sd 4 sore, Minggu dan tanggal merah tutup.


YM: [email protected]
Email: [email protected]


** AKG Earphones & Headphones **
AKG Earphones & Headphones==>KLIK SINI!!

** dbE Acoustics Earphone, FiiO Headphone Amplifier & FiiO Speaker **
dbE Acoustics Earphone, FiiO Headphone Amplifier & FiiO Speaker==>KLIK SINI!!

** Maha Powerex Rechargeable Batteries & Charger **
Maha Powerex Rechargeable Batteries & Charger==>KLIK SINI!!

** Monster IEMs & Headphones Beats™ by Dr. Dre™ **
Monster IEMs & Headphones Beats™ by Dr. Dre™==>KLIK SINI!!

** Transcend Portable HDD **
Transcend Portable HDD ==>KLIK SINI!!

** SanDisk Mp3 & Mp4 **
SanDisk Mp3 & Mp4==>KLIK SINI!!

** Sanyo Rechargeable Batteries & Charger **
Sanyo Rechargeable Batteries & Charger==>KLIK SINI!!

** Sennheiser Earphones & Headphones **
Sennheiser Earphones & Headphones==>KLIK SINI!!

** Yuin Earphones & Headphones **
Yuin Earphones & Headphones ==>KLIK SINI!!

** Testimonial dari Pelanggan **
List Testimonial Pelanggan==>KLIK SINI!

[size=+2]Reseller Welcome !! [/size]​

Jakarta :
1. Usaha Bhakti Computer
Roxy Square Lantai 1 Blok B6 No. 1
Jl. Kyai Tapa No.1
Jakarta Barat 11450
Tel. 5695-3716
www.usahabhakti.com
Senin s/d Sabtu jam 9 sd 6 Sore. Minggu jam 10 sd 3 Sore.

2. GSMOBILES
Mall Taman Palem 2nd Floor No.85-88 Blok.D Jakarta Barat
Telp/Fax: 021-54352036
Andi (0817-897978)
Hendra (0818-02222398)
www.andigs.com
Senin s/d Sabtu jam 10 sd 8.30 Malam. Minggu jam 10 sd 7 malam.

3. JOMEI HUNG COMP
Mangga Dua Mall Lantai IVA No 186-187
Jl. Manggu Dua Raya, Jakarta 10730,
Tel: 6231-7823 / 323-77-620 / 998-10-994,
Email: [email protected], YM : and_2jhc,
Senin s/d Minggu jam 11 sd - 6.30 sore

4. Victory Professional
Mangga 2 Mall lantai I no 43
Jl. Mangga Dua Raya, Jakarta
Telp. 6128881 - 30005119

TASIKMALAYA
Indra Jaya Game Shop
Jl. A. Yani No. 10
Tel: 0265 - 327711
Tasikmalaya - Jawa Barat
YM: [email protected]

YOGYAKARTA:
Gudang Digital
Jogjatronik Mall Lantai 1 no. 9
Jl. Brigjend Katamso 75-77,
Yogyakarta
Telp 0274 420088

 

[kantongkresek]

Frequenty Asked & Questions

What is the difference between dbE and other earphones?
We found in the market for entry level earphones contains of earphones with boomy bass and low details. Earphones with natural balanced and detailed sound are only available at a much higer price. Therefore, we are committed to create earphones that hold those qualities at an affordable price. Try our earphones and you will imediately feel the diffrence with other brands.

What about its sound quality?
We believe that in music, there are a lot of details that we've never heard before. We create dbE Acoustics to present the hidden details in your music. You will hear a lot of details that you've never hear before. In Addition, our earphones will be able to create "staging". You will feel that you are involved in the music, and you will be able to hear each instrument separately. This is what we call "true music experince."

What is the difference between in-ear earphone and normal earphone?
In-ear earphone gives outside noise insolation. You will be able to hear your music with low volume even in noisy surroundings, so you don't have to turn up your volume to compete with the outside noise. In ear earphone is suitable for music listening in train, bus or plane. However, never use in earphone in a situation where attention to your surrounding is needed. For example, driving and bicycling.

How low is your warrany?
All of our earphones are covered by 1 (one) year warranty for manufacturing deffect. You Will need to provide either the proof of purchase or warranty card to claim your warranty. We will replace the defective product with a new one.

What is the diffrence betweend HF and PR series?
Music Contains of jazz, pop, rock, R & B and more other genres. We believe that no earphones in this world would be able to cater every genre for music enthusiasts. Therefore, we divide our earphones lifes into PR dan HF series so every musich enthusiast can easily chose model to suit their gendre preferences. Generally, PR series is designed for music with fast punchy bass such as R&B and rock. meanwhile HF series if designed for slower music.

 

[kantongkresek]

Is a headphone amp necessary?
The answer is absolutely yes. Some hear the differences immediately; some need more time to train their ears and brains. In either case, once the differences are heard, there is no way back.

In the view of an amp, headphones can be categorized as efficient or inefficient, high or low impedance. Inefficient phones, low or high impedance, cannot be driven to enough volume by weak portables. There is no doubt that these phones need an amp. AKG 240 and 1000 and ER4S are the most popular inefficient phones.

Although efficient phones can be driven to acceptable volume by portable players, this does not necessarily mean the sound is good enough. 10mW output capacity, typical to portables, is simply too weak. The most popular efficient headphones are Sennheiser HD-580, Koss KSC-50, Grado 60 and Etymotic ER4P. When you plug these phones right into a portable player, they sound actually pretty good, but there are still some important things missing.

There is a misleading comment you see everywhere: low impedance headphones such as Grado 60 (32 ohm) and ER4P (27 ohm) do not need an amp and high impedance phones like the HD-580 (300) do need an amp. Wrong, they all need an amp, and, Grado 60 and ER4P are much harder to drive by an amp than HD-580!

Let's look at Tangent's benchmark tests for PPA amps here:

http://www.tangentsoft.net/audio/ppa/amp/bench

Comparing the benchmarks between 1 and 4 buffers, one can easily see: to drive Grado 60 with adequately low THD, IMD and crosstalk, the PPA amp needs 4 stacked buffers while only one buffer is adequate for driving a pair of HD-580. My own benchmarks show the same - low-impedance phones are far more harder to drive. Surprise? Why?

Because, low impedance phones like the Grado 60 need lots of current. When providing high current, an amp tends to generate much more nonlinear distortions, which are reflected in THD and IMD data, and crosstalk between channels. When load impedance is low, an amp's output impedance should be low too. This is obvious. The output ground resistance must keep extremely low, especially at high frequency, otherwise channel crosstalk will go too high. Stacked buffers can provide multiplied higher current capacity and lower output resistance and therefore improve benchmarks and sounding.

You see, even a super amp like PPA needs lots of efforts to drive a pair of Grado 60 and ER4P that are considered (falsely) as easy-to-drive phones, how well those 10mW portables do? When you plug your ER4P into your iPod, for example, you hear no bass, because for low frequency signal, current requirement is even far more higher. This is why, even though iPod and most other modern portables all have flat 20-20k Hz frequency responses on paper. They simply cannot generate enough juice (current) into these phones, especially for bass.

Does this mean high impedance phones like the HD-580 do not need an amp? No. For example, when you plug a pair of HD-580 into an iPod, they sound pretty good. But there are still at least two things missing here. When an amp drives low impedance phones, current capacity and output (including ground line output) impedance play the most important roles there as described above. When driving high impedance phones, current and impedance facts are relatively of less dominance, but high voltage swinging performance rules here. First, the amp must be able to swing between very high voltage rails to produce enough volume before clipping occurs. If the amp does not have enough voltage headroom, you'll hear clippings when music comes to the loudest scenes. Second, how fast the amp swings (slew rate). If it is too slow, then a fast violin stroke, for example, won't be able to break your heart. Many people complain that HD-580s do not have the same impacting of Grado 60. Actually it is their amp's fault - slew rate is too low. The 300 ohm HD-580 requires far wider voltage swings than the 32 ohm Grado 60 does; therefore, high slew rate becomes very critical.

Most portables work at very low voltage (1.5v to 4.5v) and they cannot do neither of these two things well: the magnitude and velocity of voltage swing. When you plug a pair of HD-580 right into an iPod, the sound is pretty good (low noise and distortion), but you are not going to feel any power and heart-breaking strikes.

There are many other technical details, but most people do not need to know them as they do not design or make amps, but above is the most important aspects and are enough to show how necessary good headphone amps are to headphones.

Now you may say: okay, an amp sounds better, but does it worth the money and the carrying hassle?

Good point, that's exactly why I make these affordable and extremely portable and battery-friendly amps. I'm also making an MP3 player that has a build-in hi-end amp.

You may ask: how can the SuperMini, which uses only 3 batteries, drive HD-580?

Good question. Unlike other amps that can use only 2V out of 4.5V to drive headphones, SuperMini can use all the 4.5V to drive headphones. SuperMicro uses the same rail-to-rail buffers to drive headphones with all available voltage.

Really, no any headphones that do not need an amp? There are, such as those $10 or more Sony, Panasonic and Philips. However, not that they are good enough, but too bad - don't waste your amp and money for them. As I always say, try a pair Koss KSC50 first for only $17, no matter "who you are, where you're from, what you did, as long as you love" music. They sound good enough without, but still better with an amp.

 

[kantongkresek]

What is ‘burn in’?

When speaking of headphones, ‘burn in’ is the term used for the settling oft he design parameters of the diaphragms into their intended state. The physical process is that the diaphragms loosen up through use and eventually reach a point that could be considered final. A similar situation is breaking in a new pair of shoes.

Why do people choose to burn in a new pair of headphones shortly after getting them?

Fresh out of the box, a pair of headphones may not sound as good as a well used pair, as the designers have intended. Often, people want their headphones to sound the way that they are intended as soon as possible. Most people don’t want to wait for weeks or months of regular use, so the choice is to expedite burn in by getting the process over with in the first week of ownership. Others choose to listen to their headphones as they change over the burn in period.

How do I burn in my new pair of headphones?

You can simply play music through them continuously. Some prefer using pure tones, sine wave sweeps, pink noise, or AM/FM static for burn in. Some recommend using bass heavy music. The method of burning in a headphone does not change depending on model or manufacturer.

Which burn in method is most efficient?

There is no scientific evidence proving that one is better than the other. Choose the method that you prefer.

What do I do with my headphones while they are burning in?

You can set them on a table, put them in a sock drawer, put them under some pillows, or put them on your head. It’s up to you.

Do I have to burn in my new pair before I listen to them?

No. You can listen to your new pair of headphones straight from the box. Whether or not to burn in your headphones is your choice. As you listen, you may hear gradual changes in the sound through use. Some people choose to listen periodically during the process, while some hold out until the process is complete. While still others listen for the burn in throughout the entire process listening from day one and enjoying the evolution in sound.

How much does burn in effect the sound of the headphones?

Some say burn in has a drastic effect, some say there is little effect, and some say that there is no effect. The amount of change resulting from burn in will be different for each model of headphones.

How long should I burn in my new pair?

Many recommend approximately 100 hours for most headphones. Some recommend as many as 200 hours or more. Different headphones may take longer than others for a so-called ‘complete’ burn in, and there is no exact or set length of time for burn in. It is best to use your ears to listen for changes to decide when you should stop the burn in process.

When is burn in complete? Can I burn in too much?

The idea behind initial burn in is to reach the point at which audible changes stop occurring and you are left with drivers than have settled into the sound that they will have forever after, the sound that it was designed to have. After that point, regular use of the driver won’t cause significant change in the sound, until perhaps years and years later when thousands upon thousands of hours have passed and the life of the driver is at its end. However, some say that burn in is never complete. The argument is that regular, long-term use constantly wears on the drivers and that wear always has an affect on the sound. Still, it is safe to say that, after a driver has reached its designed parameters through burn in, regular use won’t cause significant audible changes.

Is there a wrong way to burn in my headphones?

You risk damaging your headphones at any time by using extremely high volumes. Some recommend setting the volume to a comfortable listening level during burn in, while others recommend a volume slightly higher than your normal listening level. If you hear distortion, pops, or kracks due to high volume, you are likely doing damage to the drivers. Also, using very low volumes will not be very effective in burning in your headphones.

Is burn in actually real?

The idea of burn in has always been controversial. Some people say that there is evidence that proves it while others say that there is evidence to disprove it. Some consider the phenomenon to be purely psychological conditioning while others insist upon physical changes to the drivers, and some agree upon a combination of the two. You are free to be a believer, and you are free to be a skeptic. Whether or not you believe in it and the position you take on the subject is a choice that you should make for yourself.

 

[kantongkresek]

What is ‘burn in’?

When speaking of headphones, ‘burn in’ is the term used for the settling oft he design parameters of the diaphragms into their intended state. The physical process is that the diaphragms loosen up through use and eventually reach a point that could be considered final. A similar situation is breaking in a new pair of shoes.

Why do people choose to burn in a new pair of headphones shortly after getting them?

Fresh out of the box, a pair of headphones may not sound as good as a well used pair, as the designers have intended. Often, people want their headphones to sound the way that they are intended as soon as possible. Most people don’t want to wait for weeks or months of regular use, so the choice is to expedite burn in by getting the process over with in the first week of ownership. Others choose to listen to their headphones as they change over the burn in period.

How do I burn in my new pair of headphones?

You can simply play music through them continuously. Some prefer using pure tones, sine wave sweeps, pink noise, or AM/FM static for burn in. Some recommend using bass heavy music. The method of burning in a headphone does not change depending on model or manufacturer.

Which burn in method is most efficient?

There is no scientific evidence proving that one is better than the other. Choose the method that you prefer.

What do I do with my headphones while they are burning in?

You can set them on a table, put them in a sock drawer, put them under some pillows, or put them on your head. It’s up to you.

Do I have to burn in my new pair before I listen to them?

No. You can listen to your new pair of headphones straight from the box. Whether or not to burn in your headphones is your choice. As you listen, you may hear gradual changes in the sound through use. Some people choose to listen periodically during the process, while some hold out until the process is complete. While still others listen for the burn in throughout the entire process listening from day one and enjoying the evolution in sound.

How much does burn in effect the sound of the headphones?

Some say burn in has a drastic effect, some say there is little effect, and some say that there is no effect. The amount of change resulting from burn in will be different for each model of headphones.

How long should I burn in my new pair?

Many recommend approximately 100 hours for most headphones. Some recommend as many as 200 hours or more. Different headphones may take longer than others for a so-called ‘complete’ burn in, and there is no exact or set length of time for burn in. It is best to use your ears to listen for changes to decide when you should stop the burn in process.

When is burn in complete? Can I burn in too much?

The idea behind initial burn in is to reach the point at which audible changes stop occurring and you are left with drivers than have settled into the sound that they will have forever after, the sound that it was designed to have. After that point, regular use of the driver won’t cause significant change in the sound, until perhaps years and years later when thousands upon thousands of hours have passed and the life of the driver is at its end. However, some say that burn in is never complete. The argument is that regular, long-term use constantly wears on the drivers and that wear always has an affect on the sound. Still, it is safe to say that, after a driver has reached its designed parameters through burn in, regular use won’t cause significant audible changes.

Is there a wrong way to burn in my headphones?

You risk damaging your headphones at any time by using extremely high volumes. Some recommend setting the volume to a comfortable listening level during burn in, while others recommend a volume slightly higher than your normal listening level. If you hear distortion, pops, or kracks due to high volume, you are likely doing damage to the drivers. Also, using very low volumes will not be very effective in burning in your headphones.

Is burn in actually real?

The idea of burn in has always been controversial. Some people say that there is evidence that proves it while others say that there is evidence to disprove it. Some consider the phenomenon to be purely psychological conditioning while others insist upon physical changes to the drivers, and some agree upon a combination of the two. You are free to be a believer, and you are free to be a skeptic. Whether or not you believe in it and the position you take on the subject is a choice that you should make for yourself.

[size=+2]dbE Acoustics HF-10 II Earphone​

[/size]

Description :

• 14,8 mm neodynium speaker
• Cable length 1,2 m
• Input Connector : 3.5mm gold plated (fits iPhone)
• Frequency Response : 20-22.000 Hz
• Impedance 16 ohm

Specially made for jazz and jazz-vocal music, provide warm and smooth sound with deep bass. Ideal for Sport Activities

Rating:
Treble : 1,5
Mid : 2,5
Bass : 2.5
Staging : 2​

[size=+2]dbE Acoustics PR-10 Earphone​

[/size]

Description :

• 15 mm neodymium speaker
• Cable length 1,2 m
• Input connector : 3,5mm gold plated
• Frequency response : 20-22.000 Hz
• Impedance 32 ohm

Specially made for pop and rock music, provides amazing details and neutral sounds detailed sound.
(Bright characteristics with excellent soundstaging and instrument separation.)

Rating:
Trebe : 3
Mid : 2
Bass: 1,5
Staging: 2.5​

 

[kantongkresek]

[size=+2]dbE Acoustics PR-18 Earphone​

[/size]

Description :

- 9mm neodymium speaker
- Cable length 1,2 m
- Input Connector : 3.5mm gold plated
- Frequency Response : 20-22.000Hz
- Impedance 12 ohm +- 10%

Specially made for pop and rock music, provides amazing details with superb imaging of music

Rating:
Treble : 3
Mid : 2
Bass : 2.5
Staging: 3​

[size=+2]dbE Acoustics PR-20 II Earphone​

[/size]

Description:
Driver: 9mm Dynamic
Impedance: 12 Ω
Sensitivity: 97dB±2 dB / mW @ 1kHz
Frequency Response: 15Hz~22kHz
Plug: 3.5mm Gold-plated
Cable: 1.2m

Specially made for R&B and bass heavy songs. Provides amazing bass and details.

Rating:
Treble : 2.0
Mid : 2.5
Bass : 3
Staging : 2.5

[size=+2]dbE Acoustics PR-20 Earphone[/size]

- 9mm neodymium speaker
- Cable length 1,2 m
- Input Connector : 3.5mm gold plated
- Frequency Response : 20-22.000Hz
- Impedance 12 ohm +- 10%

Specially made for R&B and bass heavy songs. Provides amazing bass and details.

Rating:
Treble : 2.5
Mid : 2.5
Bass : 3
Staging : 2.5​

 

[kantongkresek]

[size=+2]dbE Acoustics HF-30 Earphone​

[/size]

- 9mm neodymium speaker
- Cable length 1,2 m
- Input Connector : 3.5mm gold plated (fits iPhone)
- Frequency Response : 20-22.000Hz
- Impedance 12 ohm +- 10%

Our top of the line with over the ear design and adjustable bass knob.
With its sweet vocals and huge soundstage, you will hear your songs like you never before.
Specialy made for jazz and jazz-vocal music. Provides warm, smooth and lifelike focal with excellent details.

Rating:
Treble: 2.5
Mid: 3
Bass: 2.5
Stanging: 3

​

 

[kantongkresek]

[size=+2]Mini Headphones Amplifier dbE Acoustics PA-20 / FiiO E3​

[/size]

Description:

The E3 is a headphone amplifier, it is designed to improve the sound quality of MP3 MP4 Players, Computers or Mobile Phones when using earphones or headphones. It saves your player battery and lengthens the play time when playing music.
It’s not about Volume but Quality. A great pair of headphones can change you're listening experience--but only if they are driven well and properly powered. Put an E3 Headphone Amplifier between your music source and your favourite pair of headphones or earphones for an awesome personal listening experience right between your ears.

Features

l Designed for high impendence and low sensitivity headphones, with bass boost function;
l Small and easy to carry and use in the outdoors;
l Increase your music player's play time;
l Uses only one AAA battery, for 20 hours playtime.

Specifications:
Output Power 70 mW (32 ohms Loaded)
12 mW (300 ohms Loaded)
Signal to Noise Ratio >= 90 dB (A Weight)
Distortion < 0.05% (10 mW)
Frequency Response 10 Hz - 40 kHz
Suitable Headphone Impedance 16 ohms - 300 ohms
Weight 11 grams (without battery)
Power Supply 1 AAA Battery
Dimensions 55 mm x 23 mm x 14.5 mm

Reviews from the famous headphone forum "Head-fi"
http://www.head-fi.org/forums/f5/fiio-amps-323979/
Reviews from the famous headphone forum "anythingbutipod"
http://www.anythingbutipod.com/archives/2008/07/fiio-e3-headphone-amplifier-mini-review.php
Reviews from the famous forum "isyougeekedup"
http://www.isyougeekedup.com/fiio-e3-headphone-amp-review-7-well-spent/

TechPowerUp Review of FiiO E3 - 9/10

"No other amp on the market comes even close to matching the price performance ratio of the FiiO E3. For a budget portable setup you have got to look long and hard to find a worthy competitor. The sound quality is really good and it does a good job with raising the volume."


[size=+2]Mini Headphones Amplifier FiiO E5[/size]

Description :
A pocket sized headphone amp designed to improve sound quality and boost volume (if required) when listening with headphones or earphones to an MP3 player (such as the iPod), computer, mobile phone or other portable devices. The FiiO E5 also reduces battery drain on portable devices, which means you can enjoy your music for longer.

Building on the strengths of the revolutionary FiiO E3 budget headphone amp, the FiiO E5 comes completely upgraded inside and out. With a specification improved in all the key areas to ensure the cleanest audio signal possible and a sleek new case to fit in with the latest MP3 players, the FiiO E5 is a dramatic upgrade from the previous model.

The FiiO E5 is a dedicated headphone power amplifier made to upgrade your portable listening experience. Portable devices often have headphone outputs without sufficient power and find it difficult to drive many headphones and earphones. With the FiiO E5 you can ensure you are getting the best out of your portable audio setup.

The FiiO E5's sound signature adds depth to the bass and enhances detail of trebles, making the E5 is a worthy upgrade to any portable audio setup.

Simply connect the FiiO E5 between your portable audio device and headphones for the ultimate mobile listening experience.

• Output Power : 15mW (16 ohm Loaded) 16mW(320 ohm Loaded)
• SNR : >= 95dB (A Weight)
• Distortion : <0,009% (10MW)
• Frequency Response : 10Hz~100KHz
• Headphone Adaptation Impedance : 16 ohm~300 ohm
• Weight : 30grm
• Power Supply : Built-in Rechargeable Li-ion Battery
• Dimensions : 44.2mmX38mmX12,6mm​

Mini Headphones Amplifier FiiO E5 Video Review
http://www.youtube.com/watch?v=Weh0JodQn_c

TrustedReviews.com 'Recommended'

"The output seems cleaner and brighter, with a pleasant, rich tone in the mid and upper range. Sound is much richer and more lively than it was, and the results with classical music are nigh on dazzling."

"Solid audio output for such a ludicrously cheap headphone amp. While your mileage will vary depending on your 'phones, its well worth giving the E5 a try if you find your existing setup lacks power."

TechPowerUp Review of FiiO E5 - 9.5/10

"If you are looking for a warm and cozy sounding amplifier you should definitely consider the E5; add the fact that it has an integrated Li-ion battery that can be charged through a mini-USB cable and you have quite a nice package."

GoodGearGuide FiiO E5 Review - 4.5/5

"For the price, there is nothing that can beat the E5's sound-boosting capabilities. For such a small device to add a significant amount of bass and have such a long battery life is very impressive indeed."

 

[kantongkresek]

[size=+2]Mini Headphones Amplifier dbE Acoustics PA-20 / FiiO E3​

[/size]

Description:

The E3 is a headphone amplifier, it is designed to improve the sound quality of MP3 MP4 Players, Computers or Mobile Phones when using earphones or headphones. It saves your player battery and lengthens the play time when playing music.
It’s not about Volume but Quality. A great pair of headphones can change you're listening experience--but only if they are driven well and properly powered. Put an E3 Headphone Amplifier between your music source and your favourite pair of headphones or earphones for an awesome personal listening experience right between your ears.

Features

l Designed for high impendence and low sensitivity headphones, with bass boost function;
l Small and easy to carry and use in the outdoors;
l Increase your music player's play time;
l Uses only one AAA battery, for 20 hours playtime.

Specifications:
Output Power 70 mW (32 ohms Loaded)
12 mW (300 ohms Loaded)
Signal to Noise Ratio >= 90 dB (A Weight)
Distortion < 0.05% (10 mW)
Frequency Response 10 Hz - 40 kHz
Suitable Headphone Impedance 16 ohms - 300 ohms
Weight 11 grams (without battery)
Power Supply 1 AAA Battery
Dimensions 55 mm x 23 mm x 14.5 mm

Reviews from the famous headphone forum "Head-fi"
http://www.head-fi.org/forums/f5/fiio-amps-323979/
Reviews from the famous headphone forum "anythingbutipod"
http://www.anythingbutipod.com/archives/2008/07/fiio-e3-headphone-amplifier-mini-review.php
Reviews from the famous forum "isyougeekedup"
http://www.isyougeekedup.com/fiio-e3-headphone-amp-review-7-well-spent/

TechPowerUp Review of FiiO E3 - 9/10

"No other amp on the market comes even close to matching the price performance ratio of the FiiO E3. For a budget portable setup you have got to look long and hard to find a worthy competitor. The sound quality is really good and it does a good job with raising the volume."


[size=+2]Mini Headphones Amplifier FiiO E5[/size]

Description :
A pocket sized headphone amp designed to improve sound quality and boost volume (if required) when listening with headphones or earphones to an MP3 player (such as the iPod), computer, mobile phone or other portable devices. The FiiO E5 also reduces battery drain on portable devices, which means you can enjoy your music for longer.

Building on the strengths of the revolutionary FiiO E3 budget headphone amp, the FiiO E5 comes completely upgraded inside and out. With a specification improved in all the key areas to ensure the cleanest audio signal possible and a sleek new case to fit in with the latest MP3 players, the FiiO E5 is a dramatic upgrade from the previous model.

The FiiO E5 is a dedicated headphone power amplifier made to upgrade your portable listening experience. Portable devices often have headphone outputs without sufficient power and find it difficult to drive many headphones and earphones. With the FiiO E5 you can ensure you are getting the best out of your portable audio setup.

The FiiO E5's sound signature adds depth to the bass and enhances detail of trebles, making the E5 is a worthy upgrade to any portable audio setup.

Simply connect the FiiO E5 between your portable audio device and headphones for the ultimate mobile listening experience.

• Output Power : 15mW (16 ohm Loaded) 16mW(320 ohm Loaded)
• SNR : >= 95dB (A Weight)
• Distortion : <0,009% (10MW)
• Frequency Response : 10Hz~100KHz
• Headphone Adaptation Impedance : 16 ohm~300 ohm
• Weight : 30grm
• Power Supply : Built-in Rechargeable Li-ion Battery
• Dimensions : 44.2mmX38mmX12,6mm​

Mini Headphones Amplifier FiiO E5 Video Review
http://www.youtube.com/watch?v=Weh0JodQn_c

TrustedReviews.com 'Recommended'

"The output seems cleaner and brighter, with a pleasant, rich tone in the mid and upper range. Sound is much richer and more lively than it was, and the results with classical music are nigh on dazzling."

"Solid audio output for such a ludicrously cheap headphone amp. While your mileage will vary depending on your 'phones, its well worth giving the E5 a try if you find your existing setup lacks power."

TechPowerUp Review of FiiO E5 - 9.5/10

"If you are looking for a warm and cozy sounding amplifier you should definitely consider the E5; add the fact that it has an integrated Li-ion battery that can be charged through a mini-USB cable and you have quite a nice package."

GoodGearGuide FiiO E5 Review - 4.5/5

"For the price, there is nothing that can beat the E5's sound-boosting capabilities. For such a small device to add a significant amount of bass and have such a long battery life is very impressive indeed."

[size=+2]Fiio E1, Control iPod Headphone Amp​

[/size]

FiiO E1 is a headphone Amplifier specially design for use with Apple's iPod and iPhone. It's first headphone amplifier in the world with in line remote control fuctions (Next, Volume Up, Play/Pause, Volume Down, Previous)
The FiiO E1 has a built in high quality headphone ampilier IC manufactured by Texas Instruments.
The FiiO E1 uses the line out signal fom the iPod/iPhone, so it provides better sound quality and is able to drive high or high impedance or low sensitivity headphones with the in line control funtion you can easiliy control the playback oh the iPod/Iphone from the E1 Ampilifier.
The FiiO E1 will bring you better sound quality and more convenient playback experience!

Feature:
●Design for iPod/iPhone
●Improves the sound quality with the line out from the dock
●Build in high quality Texas Instrument's headphone AMP IC
●High Power Output to drive high impedance or low sensitivity headphones or earphones.
●Easy control of the playback of the iPod/iPhone while the player stay securely in your pocket.
●Compatible with iPod Nano, iPod Video, iPod Touch, iPhone all generations & all versions
●Easy and simple to use, plug and play.
●Powered by iPod/iPhone (No charging or battery needed)
●Traditional Apple white style with a built in clip, you can clip it onto anything

Spec
●Output power: 80 mW (32 ohms Loaded) / 16 mW (300 ohms Loaded)
●Signal to Noise Ratio: >= 95 dB (A Weight)
●Distortion: < 0.009% (10 mW)
●Frequency Response: 10 Hz - 60 kHz
●Suitable Headphone Impedance: 16 ohms - 300 ohms
●Power Supply: use iPod / iPhone power
●Dimensions: Line control 48mmx14mmx10.7 mm
●End-to-End: 845mm
●Cable length: 780mm​

[Pictorial Review] FiiO E1
http://www.head-fi.org/forums/f105/p...iio-e1-448364/

 

[kantongkresek]

[size=+2]Portable Speaker FiiO S3 + Memory Card Player​

[/size]

Description:

S3 is a MP3 card reader / speaker. It can play music which is stored on a SD/MMC card. It is designed as a easy way to enjoy and share music. Easy to carry and still with the superior sound quality!
You can use it very easily because it doesn’t need to be connected to a music source! You can carry it very easily because of the very small size! You can play it all day because it has digital amplifier! You can share with your friends because it has good sound quality and excellent volume!
Easy use! Small size! Good sound quality! That’s what you get from a S3 speaker!
Ukurannya 156mm X 65mm X 26mm
Desainnya menarik banget dengan finishing glossy item (saat ini hanya tersedia warna putih)

Features

Built-in high performance 16-bit DSP and a 16 bit sigma-delta D/A converter with earphone power amplifier.
Support MPEG-1/2/2.5 layer 1/2/3. WMA decoder.
Card reader: Support USB2.0 card host interface : Secure Digital™ / Multi Media Card™ (SD/MMC);Supports FAT12, FAT16 or FAT32 file system format; Supports up to 16GB SDHC card
Built-in high performance class D digital amplifier. and digital volume control.
40mm neodymium magnet micro driver speakers；
Power supply: Two AA batteries; PC/Notebook USB; USB power adapter;
8 hours play time when using AA alkaline batteries at normal volume levels.
Flexible software upgrade via USB interface.
With bracket so the speaker can stand up when needed.

Specifications

Dimensions 156mm*65mm*26mm(H*W*T)
Weight 155g (without batteries)
Display Power display led x1 , status display led x 1;
PC Interface USB2.0 high speed Data Transfer
Memory Depends on SD/MMC card, up to 16G SD card
Play time up to 8 Hours of Continuous Music Playback
Audio
WMA(VBR) 8-355kbps
MP3(VBR) 8Kbps-320Kbps
Earphone Output 220mV@16Ω
Earphone Output Frequency Band 20Hz-20kHz
S/N Ratio >80dB
Distortion Rate <0.5%
Amplifier
Output Power 1.2W + 1.2W
S/N >75dB A-weight
THD+N <0.8%
Speaker
Frequency Band 150Hz-20kHz
Impedance 6 Ω
Power AA battery X 2 or DC 5V 800mA
*Note: Design and specifications are subject to change without notice.
​

Portable Speaker FiiO S3 + Memory Card Player Video Review
http://www.youtube.com/watch?v=etcZfvKJf7M

 

[kantongkresek]

[size=+2]Fiio N3 Notebook Speakers[/size]

Product Details:
Power DC 5V
Output Power 2W+2W
Usage Computer
Weight 315 grams (L and R Speakers)
Amplification Type Active
Dimensions 95 mm x 81 mm x 68mm(1 Speaker)
Frequency Response 100 Hz - 20 kHz

Detailed Product Description

Notebook Speakers N3. The small sized notebook speakers "N3" from FiiO Corporation delivers high quality sound. The speakers use 3.5mm stereo-in. The USB cable is used for power purpose only. Notebook speakers "N3" are available in two different colors white and black.

Features

>> Small and exquisite, it is convenient to move

>> 2.0 Systerm Speaker

>> Desk-top use, the angle of elevation is designed

>> The model is fashionable, match with the note-book even more

>> The standard 3.5mm audio interface, USB power

>> LED status indicator

Specifications

Power: DC5V
Output Power: 2W+2W
Frequency Response: 100 Hz - 20 kHz
Weight: 315 grams (L and R Speakers)
Dimensions: 95 mm x 81 mm x 68mm(1 Speaker)


[size=+2]FiiO Portable Speaker S9[/size]

Description:

Product Details:
Usage MP3 Player
Amplification Type Active
Output power 1.8+1.8W (THD<=10%)
Power supply 4 AA , USB power , AC adapter DC5V
Dimensions 207mm(L) , 87mm(W), 86mm(D)
Weight 800g
Frequency response 90Hz-20kHz
Brand Name FiiO
Model Number S9

Features

>> Best sound quality digital speaker

>> 3 ways of power supply: 4 AA Batteries, USB, AC power adapter
>> Electronic volume control, no adjust noise during adjusting
>> Used TI class D amplifier IC, good sound quality and high power efficient

Specifications

Output power: 1.8+1.8W (THD<=10%)
Distortion: <0.5% (1KHz, 0.5W)
S/N ratio: >80dB (A-Weight)
Frequency response: 90Hz-20kHz
Power supply: 4 AA , USB power , AC adapter DC5V
Dimensions: 207mm(L) , 87mm(W), 86mm(D)

Weight: 800g



​

 

[kantongkresek]

New..
FiiO iPod Line Out Dock

Fungsi :
- sebagai docking iPod untuk speaker anda.. menyalurkan kualitas suara terbaik dari iPod
- sebagai feeder untuk headphone amplifier.

Coba kualitas suara terbaik dr ipod dengan Line Out Dock.​

 

[kantongkresek]

iBasso T3 / T3D Ultra Portable Headphone Amplifier

Main features:
3ch Architechture Design
Two Gain switches
ALPS Potentiometer / Digital Volume Control (T3 D)
Anodized Stainless Steel Case
Rechargeable Li-Polymer Battery with integrated charging system
Charging is accomplished with either the USB cable or AC adapter
Up to 38 hours of play time
Measures 64.5L x 37W x 10H (mm), and weighs only 28g

iBasso D2+ Boa (Silver) High Performance Stereo USB-DAC/Headphone AMP

Main Features:
- Wolfson WM8740 DAC Chip + TI PCM2706
- USB signal input, provides I2S interface for decoding
- Works as a DAC+AMP Combo, a standalone AMP, or standalone DAC (Line out function)
- 2-Setting Gain Switch for impedance matching
- 470mAh rechargeable Li-polymer battery with integrated charging system - Charging is accomplished with either the furnished USB cable or AC adapter
- Measures 51*21*82mm, and weighs only 108g
- 38hours play time per charge.
- Comes with leather pouch, AC adapter, USB cable and owner¡¯s manual

The results I had with full-sized phones and the line-out on an iPod Touch were actually quite amazing"

"The fact is, once you've got used to listening to a decent pair of headphones through the D2, it's very hard to go back.

"A great sounding portable headphone amp that doubles as an outboard DAC for PC listening. Try it with the right cans, and you'll never want to listen to your headphones without one out again"

"The resulting sound from the D2 is beautiful - crisp, controlled and powerful. The D2 deepened and smoothed out the bass, gave vocals a significantly richer, velvety-smooth quality and extended the high-end."

"The D2 adds greater weight to low frequencies while bringing more detail and verve to the midrange."

 

[kantongkresek]

iBasso P3+ Portable Headphone Amp

Main Features:
- ThreeChannel/ Four Channel compatible architecture
- Totally 8 gold-plated DIP sockets for opamps and buffers rolling
- 2-Setting Gain Jumper for impedance matching
- High quality components, such as, gold plated PCB, ALPS volume pot, Nichicon cap, Vishay resistors, Switchcraft jacks.
- Powered by either 6 AAA batteries or external power adapter.
- Measures 55*21*92mm, and weighs 122g
- Comes with one silver and one black enclosure, also comes with power adapter leather pouch, connection cable, warranty card, owner¡¯s manual, and opamp rolling kit. (includes AD797*2, AD827, AD712, AD8066, LMH6655, LMH6643, LM6172, Dummy adapter*4, Transistor BUF*2, BUF634*2)






iBasso D4 Mamba High Performance Stereo USB-DAC & Headphone Amplifier

Main features:
- Dual Wolfson WM8740 DAC Chip + TI PCM2706
- USB signal input, provides I2S interface for decoding
- Works as a DAC+AMP Combo, a standalone AMP, or a standalone DAC (Line out function)
- 2-Setting Gain Switch for impedance matching
- OPAMP rollable
- AMP section can be powered by either USB or 9V battery
- Measures 55*21*92mm, and weighs 130g
- 9hours play time with 9V 300mAh battery (when powered by battery)
- Comes with extra enclosure (black color), leather pouch, USB cable and owner¡¯s manual

 

[kantongkresek]

iBasso D10 Cobra

High Performance Stereo DAC & Headphone Amplifier

Introduction:
iBasso D10 Cobra is the successor of the D1, our new high performance mobile audio solution. It is a Self powered DAC and Hi-Definition headphone amplifier with many input options, which includes digital inputs from optical, coaxial, USB, and analog input from AUX IN/OUT. It not only works as DAC/AMP combo, but also works as a stand-alone AMP, DAC, or USB soundcard.


Main Features:
- PCM2906, converts USB into a S/PDIF signal
- CS8416, DA-receiver chip
- WM8740, D/A chip
- OP+BUF structure for amplification
- 2-Setting Gain Switch for impedance matching (+3/10dB)
- Dedicated MCU (Micro Controller Unit) to manager inputs, outputs, and functions.
- Flexible input and output compatibility. It has USB, optical, coaxial, stereo input, line out, and stereo output
- Works as a combo or a stand-alone AMP, DAC, USB soundcard
- Built-in rechargeable Li-polymer battery plays up to 30 hours (30 hrs for AMP, or 20hrs for combo)
- Measures 55*21*104mm, and weights 168g
- Comes with power adapter, leather pouch, optical cable, USB cable, warranty card, owner¡¯s manual, and opamp rolling kit. (includes AD8656*2, LMH6643*2, Dummy adapter*2)

iBasso D10. .UPDATES 1st page, with Current Opamp Choices by HiFlight . . . images page 1, 12, 13, 14, 15, 21, 71
http://www.head-fi.org/forums/f105/...ght-images-page-1-12-13-14-15-21-71-a-399315/

 

[kantongkresek]

Testimonial Dari Pengguna:

Mau Testi nih:
Kemarin udah nyobain nih beberapa tipe speaker db-nya, suaranya mantap banget, gw kira mahal tapi pas tanya harganya koq murah banget euy....koq bisa earphone murah gitu tapi kualitas suaranya ga main-main...gw udah pesen 1 nih

boss, dbE HF 30-nya udah nyampe makassar tadi jam 2 siang dengan sehat wal afiat... nyampe rumah langsung tes... padahal cuma pake sansa c250, tapi mantab boss... emang bener yang boss bilang, suara bagus gak perlu mahal... trus kepikiran, perlu tambahin FiiO E3 gak boss? ayo komporin gw dong boss, hehehe...

bos kwonglung,

pesanan pr10 + pa20 + pr18 +S3 dah di terima dengan baik.

:amazed: racun dari bos ini memang tiada duanya. paling cepet menyebar. dan mematikan.

seperti biasa.
- packing mantab buka harus pake tenaga extra,
- response cepat ngetik smsnya cepet amat ya ,
- kasih informasi selalu detail. di tanya 1 pertanyaan jawabnya 2 menggoda yang tadinya mo beli satu bisa jadi macam-macam :hammer: eace:

s3 dah di coba. mantab banget barangnya. suara ok banget. volume full gak sember dan pecah. ada bassnya. mengelegar :hammer:. sampe tetangga lempar sepatu semua :ngacir: :cool:
simbada pmc kelaut aja :thumbdown. masuk kamar pembantu deh tuch jadinya. padahal beli dulu lebih mahal dari S3.

pr10 dan 18 masih di burn in nih. :nohope: 100 jam buat burn in pr10nya.

:berbusa: padahal sudah tidak tahan pengen cobain :berbusa:

Higly Recommended Seller!

Higly Recommended Goods!
​

bos, S3 dah nyampe di makassar dengan selamat, sehat walafiat, gak kurang suatu apapun...

cuma sedikit koreksi bos, nama gw kurang "L" tuh, bukan Faisa, tapi Faisal... anyway, S3 itu menurut gw amazing bgt, ukuran kecil, harga masuk akal, tapi kualitasnya top markotop...

pokoke bos satu ini Very Recommended Seller deh, pesen kemaren, hari ini nyampe trus barang dagangannya gak mengecewakan...

LAPOR BOS KWONGLUNG! :beer:

Setelah proses Burn in 50 jam akhirnya PR10 mulai menunjukan suara aslinya.
Suara treble tidak terlalu bright seperti waktu pertama kali terima.
Pertama kali terima suara treble sangat bright sampai suaranya menusuk ke telinga. :hammer::berbusa::hammer:

Detail ok banget. Bassnya tight & punchy, Mind transparant, Treble: Bright

Sangat Recommended earphonenya apalagi di kombinasikan dengan PA20.

:hammer: Earphone bawaan Clip dan Fuze parah sekali :p kalau dah denger PR10 + PA20. langsung lempar masuk tong sampah saja. :thumbdown :shutup:


:thumbupR10 + PA20 memang pasangan yang serasi. :thumbup:
dengan harga yang ekonomis, dbE Earphone sangat di recommendasikan sebagai pengganti earphone bawaan dari MP3 dan MP4 standard dan patut di sejajarkan dengan merek ternama yang beredar di pasaran :thumbup::

:shakehand dBE PR 10 + PA20 :shakehand

Slogan "Good Sound is not Expensive" benar benar bukan omongan kosong

Recommended Goods!!​

rewiew apa ya boss... newbie nih, belum ngerti apa2, tapi gw coba ya...
menurut gw, suara yang bagus belum tentu bener, n suara yang bener belum tentu bagus buat semua orang...

nah menurut gw, HF30 ini memenuhi unsur untuk disebut sebagai penghasil suara bener yang bagus... pokoknye buat gw, HF30, paling pas lah buat gw boss... dan yang pasti harganya reasonable, pokoknye you gotta hear it to believe it...

karena IEM, otomatis suara luar dapat diredam dengan baik, trus penggunaan dalam jangka waktu yang agak lama juga gak bikin kuping sakit... pokoknye gitu deh... anyway, boss satu dalam dalam merekomendasiin dagangannya, menurut gw top abis lah, informatif dan komunikatif, cocoklah buat newbie kyk gw... sukses terus boss...

Lapor Boss, order sy 2 PA20, 2 StoreJet 320GB, 1 FiiO S3 sudah sampai di Pekanbaru dengan selamat. (packingnya bagus)
PA20 order titipan teman, sudah ditest katanya memang mantap, ditest di HP SE dan Creative Zen. Suara jadi lebih jernih dan detail
S3 punya sy, jg sudah ditest, mantap walaupun kecil tapi suaranya dasyat, cocok untuk dibawa jalan2 masih bisa masuk di saku celana

 

[kantongkresek]

Portable Speaker FiiO S3 + Memory Card Player

Available in Black and White​

 

[kantongkresek]

[size=+2]

Fiio N3 Notebook Speakers

Available Now !​

[/size]​

 

[kantongkresek]

KUNJUNGILAH

The Art of Technology and Ramadhan Sale
03 - 13 September 2009, Jam 10 - 18 WIB
Roxy Square - Lt 2, Jl. Kyai Tapa No. 1, Jakarta Barat, Stand No. 45 (UB)

Dapatkan Harga-Harga Special untuk Pembelian Produk Selama Pameran

untuk keterangan lebih lanjut mengenai lokasi pameran bisa di peroleh di no [021] 9139-3513 atau [021] 6891-7529​

 

[kantongkresek]

Selamat Hari Raya Idul Fitri 1 Syawal 1430 Hijiriyah

Dalam rangka libur panjang menyambut Idul Fitri 1 Syawal 1430 Hijiriyah, bersama ini kami informasikan bahwa pengiriman barang dan pesanan terakhir untuk minggu ini adalah tgl 16 September 2009.
Pengiriman selanjutnya baru dapat di lakukan pada tgl 28 September 2009.

Untuk Customer Walk In (datang ke toko langsung) kami tetap buka hingga tanggal 17 September 2009. buka kembali tgl 24 September 2009. Khusus untuk bulan September 2009, toko tetap buka di hari Sabtu pada tanggal 26 September 2009.

Atas perhatian dan kerja samanya kami ucapkan terima kasih.​